Designer Metal 150mm 6" dia

Extractor Fans | Extractor Fans | Utility Room Extractor Fans | Designer Brushed Metal Utility Room Extractor Fan | Designer Metal 150mm 6" dia

Designer Metal Utility Room Extractor Fan 6" dia

Ref: UT-LXA3-150

From: £46.21 (Incl. VAT @ 20%)

Select A Quantity:

Control Options

No Controls £46.21

Timer £50.59

Pull Cord £48.13

Humidity/Timer £57.43

Our Designer Utility Room Extractor Fan will suit any modern contemporary utility room or anywhere where a great look is desired. The extractor fan is finished with a high quality brushed aluminium front that will complement any room.

Up to 265 M3/h Airflow Rate.
Designer contemporary look, low profile and slimline.
24w Energy consumption.
Finished in brushed aluminium.
Backdraught shutter included.

Features
Spec Check
How Does it Work?
How is it Wired?
Will it Fit?
Need Help?

Designer Utility Room Extractor fans will suit any utility room where a fresh look is desired. The LXA3 Series Utility Room Extractor has a designer look and feel and would blend into any contemporary utility room. Finished in in brushed aluminium metal with a good airflow rate, noise level and efficiency.

Contemporary look and design.
Finished in brushed aluminium metal.
Membrane, butterfly wing action shutter fitted as standard.
Great range of control options.
Retrofit into existing 150mm, 6" circular aperture.

Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:

265 m3/h (metres cubed per hour).
73 l/s (litres per second).
155 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

220-240 Vac 50/60Hz UK & European Mains AC Voltage.
24 Watts.
0.13 Amps.

Sound
This fan has a noise level of 37 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.

	No Controls Connect to your own method of control ie, separate pull cord, switch, humidity sensor or simply to a plug.
	Run-on Timer Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Pull Cord Simply be operated by its own built-in pull cord.
	Humidity Sensor & Timer Will switch on when your room gets humid. Adjustable from 60 to 90% Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Butterfly Wing Action Shutter Fitted on the back of the fan to stop backdraught.

	No Controls Live connection from your light switch, pull cord or seperate control to L. Perminent Neutral connection to N.
	Run-on Timer Perminent Live connection to L & Neutral connection to N.
	Pull Cord Perminent live connection to L. Switched live to LT and perminent neutral to N. Timer is adjusted inside the fan.
	Humidity Sensor & Timer Perminent live connection to L. Switched live to LT and perminent neutral to N. Timer & humidity is adjusted inside the fan.