Silenta Bathroom Extractor Fan - 150mm 6"

Extractor Fans | Extractor Fans | Bathroom Extractor Fans | Bathroom Extractor Fans - Silent | Silenta Bathroom Extractor Fan - 150mm 6"

Silenta Bathroom Extractor Fan - 150mm 6" Dia 4

Ref: F-P8

From: £33.82 (Incl. VAT @ 20%)

Select A Quantity:

Select Your Control Options

Our Silenta, Low Noise, Low Energy Classic Bathroom Extractor Fan will suit any modern contemporary bathroom or anywhere where a classic look is desired.

Up to 242 M3/h Airflow Rate.
Classic design finished in brilliant white.

Only 20w Energy consumption!
Low Noise! Only 33 dB(A)!

Features
Spec Check
How Does it Work?
How is it Wired?
Will it Fit?
Need Help?

Silenta bathroom extractor fans will suit any bathroom where a fresh look is desired. The Silenta Series bathroom extractor has a classic 'fan grille' design with a good airflow rate, noise level and effeciency.

Classic look and design.
Finished in brilliant white.
Membrane, butterfly wing action shutter fitted as standard.
Great range of control options.
Retrofit into existing 150mm, 6" circular aperture.

Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:

242 m3/h (metres cubed per hour).
67 l/s (litres per second).
142 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

220-240 Vac 50/60Hz UK & European Mains AC Voltage.
Only 20 Watts!
0.14 Amps.

Sound
This fan has a noise level of 33 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.

	No Controls Connect to your own method of control ie, separate pull cord, switch, humidity sensor or simply to a plug.
	Run-on Timer Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Pull Cord Simply be operated by its own built-in pull cord.
	Humidity Sensor & Timer Will switch on when your room gets humid. Adjustable from 60 to 90% Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Movement Detector Will switch on when you enter the room. Will detect your movement from 1 to 4m away, at 100 degree angle. Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Butterfly Wing Action Shutter Fitted on the back of the fan to stop backdraught.

	No Controls Live connection from your light switch, pull cord or seperate control to L. Permanent Neutral connection to N.
	Run-on Timer Permanent live connection to L. Switched live to LT and permanent neutral to N. Timer is adjusted inside the fan.
	Pull Cord Permanent Live connection to L & Neutral connection to N.
	Humidity Sensor & Timer Permanent live connection to L. Switched live to LT and permanent neutral to N. Timer & humidity is adjusted inside the fan.
	Movement Detector Permanent Live connection to L & Neutral connection to N. Timer is adjusted inside the fan.