Designer White + Light 125mm 5" dia

Extractor Fans | Extractor Fans | Office Extractor Fans | Designer Office Extractor Fan with LED Light | Designer White + Light 125mm 5" dia

Office Extractor Fan with LED light 5" dia

Ref: OF-STAR-125

From: £37.30 (Incl. VAT @ 20%)

Select A Quantity:

Control Options

Extractor Fan & Light £37.30

+ Separate Run-on Timer £54.82

+ Separate Humidity Sensor & Timer £60.72

+ Separate Photo Sensor & Timer £57.31

The X-Star Office Extractor Fan will suit any modern contemporary office or anywhere where a modern look is desired.

164 M3/h airflow rate.
Built-in energy saving LED light.
16w energy consumption.
Brilliant white designer finish.

Features
Spec Check
How is works?
Will it Fit
Need Help?

The X-Star Office Extractor Fan will suit any modern contemporary office or anywhere where a modern look is desired. The X-star Office Extractor Fan will either blend in to white ceiling or wall so attention is drawn to other features within your room or will make a statement against a contrasting colour.

Built-in light!
The X-Star Office Extractor Fan has the added benifit of a built-in LED light. This type of light is cooler and has a longer life than traditional halogen lights, better suited to humid environments.

Slim, flush mounting.
Modern fresh look.
Membrane shutter fitted as standard.
2w LED integral light (GU10 fitting).
Quiet running.
Retrofit into existing 125mm, 5" dia circular aperture.

Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:

164 m3/h (metres cubed per hour).
45 l/s (litres per second).
96 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

220-240 Vac 50/60Hz UK & European Mains AC Voltage.
16 Watts.
0.1 Amps.

Sound
This fan has a noise level of 34 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.

	Extractor Fan & Light This option is for the fan with a light only. Choose this option if you want to connect to your own method of control ie, separate pull cord, switch, humidity sensor or simply to a Plug.
	Separate Run-on Timer This option is for the fan with a light and a separate run-on timer. Choose this option if you require your fan continue to function after you have turned off your switch. The separate run-on timer is adjustable from 2 to 30 mins.
	Separate Humidity Sensor & Timer This option is for the fan with a light and comes with a separate humidity sensor and run-on timer. Choose this option if you need your fan to automatically turn on when your room gets humid. This is adjustable from 60 to 90% relative humidity. This option also comes with a run-on timer. Your fan will continue to function after you have turned off your switch. The separate run-on timer is adjustable from 2 to 30 mins.
	Separate Photo Cell and Run-on Timer This option is for the fan with a light and comes with a separate photo cell and run-on timer. Choose this option if you need your fan to automatically turn on when the room is illuminated (normally by a person entering the room and switching a light on). The fan will automatically switch on by detecting the light increase (adjustable). This option will also allow your fan to continue to run after the room goes dark (normally by a person switching a light off). The run-on timer is adjustable from 2 to 30 mins.