Designer White 150mm 6" dia

Extractor Fans | Extractor Fans | Kitchen Extractor Fans | Designer White Kitchen Extractor | Designer White 150mm 6" dia

Designer White Kitchen Extractor Fan 6" dia

Ref: KI-LX3-150

From: £27.29 (Incl. VAT @ 20%)

Select A Quantity:

Control Options

No Controls £27.29

Timer £31.24

Pull Cord £29.02

Humidity/Timer £37.40

Our Designer Kitchen Extractor Fan will suit any modern contemporary kitchen or anywhere where a great look is desired. Will blend discreetly in to a white ceiling or stand out against a contrasting coloured wall.

Up to 265 M3/h Airflow Rate.
Designer contemporary look, low profile and slimline.
24w Energy consumption.
Finished in brilliant white.
Backdraught shutter included.

Features
Spec Check
How Does it Work?
How is it Wired?
Will it Fit?
Need Help?

Designer Kitchen Extractor fans will suit any kitchen where a fresh look is desired. The LX3 Series Kitchen Extractor has a designer look and feel and would blend into any contemporary kitchen. Finished in brilliant white with a good airflow rate, noise level and efficiency.

Contemporary look and design.
Finished in brilliant white.
Membrane, butterfly wing action shutter fitted as standard.
Great range of control options.
Retrofit into existing 150mm, 6" circular aperture.

Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:

265 m3/h (metres cubed per hour).
73 l/s (litres per second).
155 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

220-240 Vac 50/60Hz UK & European Mains AC Voltage.
24 Watts.
0.13 Amps.

Sound
This fan has a noise level of 37 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.

	No Controls Connect to your own method of control ie, separate pull cord, switch, humidity sensor or simply to a plug.
	Run-on Timer Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Pull Cord Simply be operated by its own built-in pull cord.
	Humidity Sensor & Timer Will switch on when your room gets humid. Adjustable from 60 to 90% Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Butterfly Wing Action Shutter Fitted on the back of the fan to stop backdraught.

	No Controls Live connection from your light switch, pull cord or seperate control to L. Permanent Neutral connection to N.
	Run-on Timer Permanent Live connection to L & Neutral connection to N.
	Pull Cord Permanent live connection to L. Switched live to LT and permanent neutral to N. Timer is adjusted inside the fan.
	Humidity Sensor & Timer Permanent live connection to L. Switched live to LT and permanent neutral to N. Timer & humidity is adjusted inside the fan.