Classic White 150mm 6" dia

Extractor Fans | Extractor Fans | Toilet/Cloak Extractor Fans | Classic White Toilet Extractor Fan | Classic White 150mm 6" dia

Classic Toilet/Cloakroom Extractor Fans 6" dia

Ref: TO-M-150

From: £24.80 (Incl. VAT @ 20%)

Select A Quantity:

Control Options

Our Classic Toilet/CloakroomFan will suit any modern contemporary toilet or anywhere where a classic look is desired.

Up to 295 M3/h Airflow Rate.
Classic design finished in brilliant white.
24w Energy consumption.
Backdraught shutter included.

Features
Spec Check
How Does it Work?
How is it Wired?
Will it Fit?
Need Help?

Classic toilet/cloakroom extractor fans will suit any toilet or cloakroom where a fresh look is desired. The M Series toilet cloakroom extractor has a classic 'fan grille' design with a good airflow rate, noise level and effeciency.

Classic look and design.
Finished in brilliant white.
Membrane, butterfly wing action shutter fitted as standard.
Great range of control options.
Retrofit into existing 150mm, 6" circular aperture.

Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:

295 m3/h (metres cubed per hour).
81 l/s (litres per second).
173 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

220-240 Vac 50/60Hz UK & European Mains AC Voltage.
24 Watts.
0.13 Amps.

Sound
This fan has a noise level of 39 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.

	No Controls Connect to your own method of control ie, separate pull cord, switch, humidity sensor or simply to a plug.
	Run-on Timer Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Pull Cord Simply be operated by its own built-in pull cord.
	Humidity Sensor & Timer Will switch on when your room gets humid. Adjustable from 60 to 90% Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Movement Detector Will switch on when you enter the room. Will detect your movement from 1 to 4m away, at 100 degree angle. Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.
	Butterfly Wing Action Shutter Fitted on the back of the fan to stop backdraught.

	No Controls Live connection from your light switch, pull cord or seperate control to L. Perminent Neutral connection to N.
	Run-on Timer Perminent Live connection to L & Neutral connection to N.
	Pull Cord Perminent live connection to L. Switched live to LT and perminent neutral to N. Timer is adjusted inside the fan.
	Humidity Sensor & Timer Perminent live connection to L. Switched live to LT and perminent neutral to N. Timer & humidity is adjusted inside the fan.
	Movement Detector Perminent Live connection to L & Neutral connection to N. Timer is adjusted inside the fan.