Classic White 100mm 4" dia 12v SELV

Extractor Fans | Extractor Fans | Bathroom Extractor Fans | Classic White Bathroom Extractor Fan | Classic White 100mm 4" dia 12v SELV

Classic Bathroom Extractor Fans Low Voltage 4" Dia

Ref: BA-M-100-12

Our Classic Bathroom Extractor Fan will suit any modern contemporary bathroom or anywhere where a classic look is desired.

Up to 86 M3/h Airflow Rate.
Classic design finished in brilliant white.
14w Energy consumption.
Backdraught shutter included.
12v SELV motor suitable for zones 1 & 2.

From: £15.82 (Incl. VAT @ 20%)

Select A Quantity:

Select Your 12v Transformer

100mm - No Transformer £15.82

100mm - Concealed Mounting £35.26

100mm - Surface Mounting £37.66

100mm - Pull Cord £38.86

100mm - Timer £57.86

100mm - Humidity & Timer £101.78

Classic bathroom extractor fans will suit any bathroom where a fresh look is desired. The M Series bathroom extractor has a classic 'fan grille' design with a good airflow rate, noise level and effeciency.

Fitted with a 12v SELV motor to meet the requirments of zone 1 & 2 for extractor fans in bathrooms.

Classic look and design.
Finished in brilliant white.
Membrane, butterfly wing action shutter fitted as standard.
Great range of control options.
Retrofit into existing 100mm, 4" circular aperture.

Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:

86 m3/h (metres cubed per hour).
23 l/s (litres per second).
50 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

12 Vac 50/60Hz UK & European AC Voltage.
14 Watts.
1.5 Amps.

Sound
This fan has a noise level of 33 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.

	No Transformer 12v SELV Basic fan to connect to your exisiting transformer.
	Concealed Fixing Transformer 12v SELV Basic transformer for 'out-of-sight' mounting.
	Standard Transformer 12v SELV Basic transformer for connecting to your exisiting switch or pull cord.
	Transformer with Run-on Timer Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins. Timer is mounted and adjusted inside the transformer.
	Transformer with Pull Cord Simply operated by its own built-in pull cord. Pull cord is mounted and operated at the transformer.
	Humidity Sensor & Timer Will switch on when your room gets humid. Adjustable from 60 to 90% Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins. Timer & humidity is mounted and adjusted inside the transformer.