6" Hydroponic Fan Filter Kits

Extractor Fans | Extractor Fans | Hydroponic Extractor Fans | Hydroponic Fan Filter Kits |  6" Hydroponic Fan Filter Kits


Hydroponic Extractor Fan Premium Filter Kit 6
View Larger Images

Hydroponic Extractor Fan Premium Filter Kit 6"

Bookmark and Share

Ref: TT-150-PRO-150-333-K

From: £89.99 (Incl. VAT @ 20%)

Select A Quantity:

Our 6" hydroponic extractor fan premium filter kit is a superb choice to completley elliminate nasty odours without compromising airflow.

  • Up to 550 M3/h Airflow Rate.
  • Matched items to elliminate ALL smells.
  • Premium carbon filter.
  • 150mm, 6" connections.
  • Ducting & clips included.



Our 6" hydroponic extractor fan premium filter kit is a superb choice to completley elliminate nasty odours without compromising airflow.
  • Up to 550 M3/h Airflow Rate.
  • Matched items to elliminate ALL smells.
  • Premium carbon filter.
  • 150mm, 6" connections.
  • Ducting & clips included.


Optimal Setup

 


To get the most out of your 6" fan, premium carbon filter kit, please follow these few tips:

If you reverse-mount your 6" PRO Premium Carbon Filter you will lose the benefit of your pre-filter and reduce the life of the carbon.

Always mount your 6" PRO premiun carbon filter as high as possible. Hot air naturally rises and so will your odours!

Try not to block too much of your 6" PRO premium carbon filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter.

Do Not mount your 6" PRO Premium Carbon Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours!

Ensure you have an airtight seal around the connection of your 6" PRO premium carbon filter to ducting or extractor fan.

Do Not use your 6" premium carbon filter if it is damaged in anyway.

Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:
  • 552 m3/h (metres cubed per hour).
  • 153 l/s (litres per second).
  • 324 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

  • 220-240 Vac 50/60Hz UK & European Mains AC Voltage.
  • 60 Watts.
  • 0.27 Amps.

Sound
This fan has a noise level of 44 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.


PRO Premium Carbon Filter Spec:
  • Virgin activated cabon pellets to ensure a low pressure drop.
  • 0.1 second contact time to ensure complete odour removal.
  • EU3 grade synthetic prefilter.

Go Back

 
Fantronix Limited Useful Links